Lino printing guide

Lino printing ink, and can you use acrylic paint?

Yes, you can use acrylic paint for lino printing, but mix it with an acrylic block printing medium. Plain acrylic dries too fast on the roller and the block, so the print is patchy. For your first prints, a water-based block printing ink is easier: it is thick and tacky, it cleans up with water, and it is made for the job.

The types of ink compared

InkExamplesWorking timeClean up withGood for
Water-based block printing inkEssdee Block Printing Ink, Speedball Water-Soluble Block Printing InkShort: it dries quicklyWaterBeginners, children, a kitchen table
Washable oil-based inkCranfield Caligo Safe Wash Relief InkLongSoap and water (no solvents)Rich, even colour; multi-colour prints
Traditional oil-based inkRelief inks for printing pressesLongVegetable oil or solventStudio and press work
Acrylic paint with block printing mediumAcrylic paint plus Daler-Rowney Adigraf Acrylic Block Printing MediumMediumWater, before it driesColours you already have
Fabric block printing inkEssdee Fabric Printing Ink, Speedball Fabric Block Printing InkDepends on the inkSoap and waterTees, totes and tea towels: see printing on fabric

Prints made with water-based ink can smudge if they get wet later. Oil-based ink takes longer to dry, but the print is stronger when it is dry.

Acrylic paint: how to make it work

  1. Mix the paint with an acrylic block printing medium. The medium makes the paint smoother and slower to dry, so you have time to roll it out. Follow the ratio on the label.
  2. Work quickly and in small amounts. Mix only what you need for a few prints.
  3. Wash the roller and the block straight after printing. Dry acrylic does not wash off, and it can spoil a roller.

Dry acrylic prints resist water. This makes acrylic useful for cards and gift tags that people will handle.

Other paints

Poster paint, watercolour and craft paint are usually too thin. They run into the carved lines and dry unevenly, so the print looks blotchy. Block printing ink is thick and tacky, so it stays on the top surface of the block. If you have only paint, test it on a small offcut first.

Which ink to buy first

Many starter kits include water-based ink and a roller. See the best lino printing kits in the UK.

How to roll ink well

  1. Put a small line of ink on a smooth, flat surface, such as glass or acrylic sheet.
  2. Roll it out in different directions until it is a thin, even layer. It makes a soft, slightly sticky sound.
  3. Roll the ink onto the block in two or three thin passes, not one thick pass.
  4. Too much ink fills the fine lines. Too little gives a speckled print. Make a test print on scrap paper first.

For more than one colour, read how to make a multi-colour lino print. To plan the colours from a photo, use the free PULPO! tool: it splits the photo into a plate for each ink and gives an ink recipe for each colour in the Maker pack.

Plan your colours from a photo

Upload any photo and get a plate for each colour, free. Choose your inks, see the finished print, then carve.

Make your plates

Sources

Questions

Can you use acrylic paint for lino printing?

Yes, but mix it with an acrylic block printing medium, such as Daler-Rowney Adigraf Acrylic Block Printing Medium. Plain acrylic paint dries too fast on the roller and the block, so the print is patchy. The medium makes it smoother and slower to dry.

Can you use normal paint instead of lino ink?

Most paints are too thin and dry too fast, so they fill the fine lines and print unevenly. Block printing ink is thick and tacky, so it sits on the top of the block and gives a clean print.

Which lino ink is best for beginners?

A water-based block printing ink, such as Essdee Block Printing Ink. It cleans up with water and dries quickly. For richer colour and a longer working time, try a washable oil-based ink such as Cranfield Caligo Safe Wash.

How long does lino ink take to dry?

Water-based ink is usually dry to the touch in hours. Oil-based ink can take several days, more for thick layers. Let each colour dry before you print the next one on top.

Can I use lino ink on fabric?

Not for anything you will wash. Use a fabric block printing ink. See our guide to lino printing on fabric.