Lino printing on fabric
To lino print on fabric, use a fabric block printing ink, not a normal lino ink. Wash and iron the fabric first, put a board inside a tee, roll a thin layer of ink on the block, press the block firmly onto the fabric, then let it dry. Some fabric inks are fixed with an iron and some must only air-dry, so follow the instructions for your ink.
Which ink to use
Use an ink made for fabric. Two common ones in the UK work in different ways.
| Ink | Base | How to fix it | Washing | Clean up with |
|---|---|---|---|---|
| Essdee Fabric Printing Ink | Water | Let it dry, then iron the back of the print with no steam for 4 minutes | Up to 40 °C after fixing | Soap and water |
| Speedball Fabric Block Printing Ink | Oil | Do not heat set: let it air-dry in a room with fresh air | Wait about one week, then wash cool with mild soap | Soap and water |
Speedball says its fabric ink works on cotton, linen, rayon and polyester blends, but not on nylon.
Which fabric to use
- Best: smooth, tightly woven natural fabric, such as cotton or linen. Tote bags, tea towels and plain cotton tees work well.
- Harder: thick, stretchy or textured fabric. The ink does not reach the low parts, so the print looks patchy.
- Always wash new fabric first, then dry and iron it. New fabric often has a finish on it that stops the ink from going in.
Print a tee, step by step
- Carve the block. See how to carve lino. Remember that the print is a mirror image of the block.
- Prepare the tee. Wash, dry and iron it. Put a piece of card or board inside, so the ink does not go through to the back.
- Lay it flat on a slightly padded surface, for example a folded sheet or a thin piece of felt. Smooth out the creases.
- Ink the block. Roll out the ink thinly until it sounds slightly sticky, then roll it evenly onto the block.
- Print. Put the block ink side down on the fabric. Press firmly all over: stand on it on a hard floor, use a clean roller on the back, or press hard with the palm of your hand.
- Lift the block straight up, in one movement.
- Dry and fix the print as the ink maker says (see the table above).
For two colours, print the first colour on all your pieces, let it dry, then print the second colour on top or in the gaps. The method is the same as on paper: see how to make a multi-colour lino print.
Fix and wash
The fix decides how long the print lasts. Follow your ink's instructions exactly. Wash the item inside out, on a cool or gentle wash, for the first few washes. Do not tumble dry at a high heat.
Common mistakes
| Mistake | What happens | Fix |
|---|---|---|
| Paper ink on fabric | The print washes out or cracks | Use a fabric block printing ink |
| Fabric not washed first | The ink sits on top and fades | Wash, dry and iron the fabric before you print |
| Too much ink | Blurred edges and filled-in lines | Roll a thin layer, until the ink sounds slightly sticky |
| No card inside the tee | Ink goes through to the back | Put card or board inside before you print |
| Washed too soon | The print fades or comes off | Fix it, and wait as long as the ink maker says |
Or let us print it
Make your design free from any photo. Carve it yourself, or we print it on a tee, sweatshirt, hoodie or tote and deliver it in the UK.
Start with a photoSources
- How to block print onto fabric with Speedball Fabric Block Printing Ink (Handprinted)
- Speedball Fabric Block Printing Ink: product details (Handprinted)
- Essdee Fabric Lino Printing Ink: product details (Modulor)
Questions
Can I use normal lino ink on fabric?
Not for anything you will wash. Use a fabric block printing ink. Normal block printing ink is made for paper and washes out or cracks on fabric.
Do I need to iron a lino print on fabric?
It depends on the ink. Water-based fabric inks such as Essdee Fabric Printing Ink are fixed with an iron: on the back of the print, with no steam, for about 4 minutes. Speedball Fabric Block Printing Ink is oil-based and must not be heat set: let it air-dry instead.
How long before I can wash a lino printed tee?
Follow the ink maker's instructions. For Speedball Fabric Block Printing Ink, wait about one week, then wash on a cool setting with mild soap. Essdee Fabric Printing Ink washes at up to 40 °C after you fix it with an iron.
Which fabric is best for lino printing?
A smooth, tightly woven natural fabric such as cotton or linen, washed first. Thick, stretchy or very textured fabric is harder to print evenly.
Can PULPO! print my lino design on a tee for me?
Yes. Make your design with the free tool, then choose a tee, sweatshirt, hoodie or tote. We print it to order and deliver it in the UK.